Goodman mini split code 00
No fault stored (normal).
- TypeStatus, not a fault
- SystemDisplay
- Can I fix it?Usually a homeowner fix
What 00 means on a Goodman
The self-diagnosis returned 00 with a long beep, which means no error is stored. If the unit is still misbehaving, the problem is not one the controller detects (airflow, thermostat placement, a dirty filter).
On this platform, 00 is a status, not a fault: the unit is telling you what it is doing; nothing is wrong.
What to do
You can almost always clear this yourself with the steps below.
- Check filters, set temperature and mode before looking further.
When to call a technician
This is not a fault. No technician is needed unless it will not clear.
Which Goodman units show 00
This page applies to Goodman e-Series wall-mount (FTXNG indoor / RXNG outdoor) units. Goodman's own documentation lists 00 as "No fault stored (normal)", the same definition used across the Daikin it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.
Where Goodman shows this code
Most Daikin wall units do not show the code on the unit; the operation lamp blinks. To read the code, point the remote at the unit, hold CANCEL (or Timer Cancel) for about 5 seconds until 00 shows, then press CANCEL repeatedly. Each press shows a code; when the unit gives a long continuous beep instead of two short beeps, the code on the remote is the stored fault. Units with a wired controller show the code directly. A and C codes are indoor-unit faults, E, F, H, J, L and P codes are outdoor-unit faults and protections, and U codes are system-level problems such as communication, power supply and refrigerant shortage.
Other Goodman codes
00 on other brands
The same characters do not always mean the same thing. Check the brand on your unit.
- Daikin 00 No fault stored (normal)
Questions people ask
Is 00 on a Goodman mini split an error?
No. 00 is a status message: no fault stored (normal). The self-diagnosis returned 00 with a long beep, which means no error is stored.
Do I need a technician for Goodman 00?
You can almost always clear this yourself with the steps below. This is not a fault. No technician is needed unless it will not clear.
Sources
- Goodman e-Series product documentation (FTXNG / RXNG models)
- Daikin residential (RA) service manuals (error code tables)
Updated September 2026. Codes and definitions vary by model year. If your manual disagrees with this page, your manual wins. Send a correction.