Hisense mini split code 0

What to do

You can almost always clear this yourself with the steps below.

1. Check the mode, set temperature and filters before looking further.

When to call a technician

This is not a fault. No technician is needed unless it will not clear.

Which Hisense units show 0

This page applies to Hisense Hisense inverter single-zone and Hisense multi-zone units. Hisense's own documentation lists 0 as "No fault stored (normal)", the same definition used across the Hisense it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.

Where Hisense shows this code

Hisense inverter splits store the fault as a number. When the compressor has stopped on a fault, point the remote at the unit and press the SLEEP button 10 times within 10 seconds: the indoor display then shows the code (a second stored fault shows after four more presses). The Sleep, Timer and Running lamps also blink a pattern that matches the code. Newer models show the number on the display without the button sequence. Codes 1 to 21 are outdoor-unit faults and protections; 33 to 41 are indoor-unit faults. 0 means no fault is stored.

Other Hisense codes

All Hisense error codes