Klimaire mini split code cF

What to do

You can almost always clear this yourself with the steps below.

1. Wait a minute or two; the fan starts on its own once the coil is warm.

When to call a technician

This is not a fault. No technician is needed unless it will not clear.

Which Klimaire units show cF

This page applies to Klimaire KSIV / KSIE / KSIO single-zone, KSIM / KMIR multi-zone and KSID / KDIP ducted units on the indoor unit display (four-character codes). Klimaire's own documentation lists cF as "Anti-cold-air (heating warm-up)", the same definition used across the Midea platform (four-character codes) it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.

Where Klimaire shows this code

indoor unit display (four-character codes): The display shows a two-letter prefix and a two-character suffix, either together (EH60) or alternating (EH, then 60). Write both parts down; the suffix is what identifies the fault. EH and EL are indoor-side faults, EC is an outdoor-side fault, and PC is an outdoor protection: the unit stopped itself to prevent damage.

Other Klimaire codes

Same part of the system as cF:

All Klimaire error codes

cF on other brands

The same characters do not always mean the same thing. Check the brand on your unit.

• Pioneer cF Anti-cold-air (heating warm-up)