ACiQ mini split error code Fy
Refrigerant deficiency protection. Also shown as FY.
- TypeProtection
- SystemRefrigerant circuit
- Can I fix it?Homeowner checks, then maybe a tech
- Applies toK-series (ACiQ-K09W-HP…, TCL-built)
What Fy means on a ACiQ
The board concluded the refrigerant charge is low from coil temperatures and stopped the compressor.
On this platform, Fy is a protection: the system stopped or throttled itself to prevent damage; many clear on their own once conditions return to normal.
Common causes
- A leaking flare joint.
- Service valves not fully open.
- A genuine leak on an older system.
How to fix it yourself
Work through the checks below first; they resolve most cases. If they do not, the repair itself may need a technician.
- Open both service valves fully.
- Leak-check every joint with soapy water.
- Anything inside the refrigerant circuit (sensors are fine, but valves, compressors and leaks are not) needs EPA-certified refrigerant handling. That is a technician job.
Switch off power at the breaker before opening either unit. Capacitors in the outdoor unit hold a charge for several minutes after power is cut.
When to call a technician
A technician must find the leak and recharge by weight.
Which ACiQ units show Fy
This page applies to ACiQ Standard single-zone (ACiQ-09Z-HP…B / W-HP) and multi-zone and K-series (ACiQ-K09W-HP…, SZDM / WHP / KZHP) units on the K-series (ACiQ-K09W-HP…, TCL-built). ACiQ's own documentation lists Fy as "Refrigerant deficiency protection", the same definition used across the TCL platform it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.
Where ACiQ shows this code
K-series (ACiQ-K09W-HP…, TCL-built): The indoor display shows the code in place of the set temperature. E codes are faults: something has failed and needs diagnosis. P, H, d and F codes are protections: the system stopped or throttled itself to prevent damage, and many clear on their own once conditions return to normal.
Other ACiQ codes
Same part of the system as Fy:
Fy on other brands
The same characters do not always mean the same thing. Check the brand on your unit.
- Zone Air Fy Refrigerant deficiency protection
Questions people ask
Can I reset a ACiQ Fy code myself?
Yes. Turn the system off at the breaker for five minutes, then restart it. If Fy comes back, the fault is real and needs the checks above.
Is it safe to keep running a ACiQ showing Fy?
Not repeatedly. A protection code means the unit stopped itself to prevent damage, and resetting it over and over can turn a cheap repair into a compressor failure. Reset once, check the basics, and stop if it returns.
Do I need a technician for ACiQ Fy?
Work through the checks below first; they resolve most cases. If they do not, the repair itself may need a technician. A technician must find the leak and recharge by weight.
Sources
- ACiQ Standard Single-Zone Mini Split Service Manual (SZ-Z-HP / W-HP), Quick Maintenance by Error Code
- ACiQ Mini-Split Air Handler and Condenser Service Manual (MS-SZDM / WHP / KZHP), error code table
Updated September 2026. Codes and definitions vary by model year. If your manual disagrees with this page, your manual wins. Send a correction.