Blueridge mini split code FC

What to do

You can almost always clear this yourself with the steps below.

1. Press the manual button on the indoor unit again, or turn the unit off with the remote, to exit forced cooling.

When to call a technician

This is not a fault. No technician is needed unless it will not clear.

Which Blueridge units show FC

This page applies to Blueridge BMKH wall-mount, floor-ceiling and multi-zone (2016 and later) and BMY / BMX S-series single-zone (2023 and later) units on the BMY / BMX S-series (Midea table, four-character codes). Blueridge's own documentation lists FC as "Forced cooling test mode", the same definition used across the Midea platform (four-character codes) it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.

Where Blueridge shows this code

BMY / BMX S-series (Midea table, four-character codes): The display shows a two-letter prefix and a two-character suffix, either together (EH60) or alternating (EH, then 60). Write both parts down; the suffix is what identifies the fault. EH and EL are indoor-side faults, EC is an outdoor-side fault, and PC is an outdoor protection: the unit stopped itself to prevent damage.

Other Blueridge codes

Same part of the system as FC:

All Blueridge error codes

FC on other brands

The same characters do not always mean the same thing. Check the brand on your unit.

• Pioneer FC Forced cooling test mode
• Zone Air FC High power limit (frequency reduction protection)