Comfortmaker mini split error code E7
Mode conflict (multi-zone).
- TypeProtection
- SystemOperation
- Can I fix it?Usually a homeowner fix
- Applies toDLC4 / DLF4 series, 2013 to 2015 (Gree-built)
What E7 means on a Comfortmaker
On a multi-zone system one indoor unit is asking for heating while another asks for cooling. The zone that lost shows E7 and waits.
On this platform, E7 is a protection: the system stopped or throttled itself to prevent damage; many clear on their own once conditions return to normal.
Common causes
- Zones set to opposite modes.
- A zone in Auto mode flipping to the opposite mode.
How to fix it yourself
You can almost always clear this yourself with the steps below.
- Set every zone to the same mode; Fan-only does not conflict.
- Avoid Auto mode on multi-zone systems.
Switch off power at the breaker before opening either unit. Capacitors in the outdoor unit hold a charge for several minutes after power is cut.
When to call a technician
Not a fault.
Which Comfortmaker units show E7
This page applies to Comfortmaker DLCSRA / DLCSRB / DLCLRA outdoor with DLFSHA / DLFSFA indoor (2015 and later) and DLC4 / DLF4 (2013 to 2015) units on the DLC4 / DLF4 series, 2013 to 2015 (Gree-built). Comfortmaker's own documentation lists E7 as "Mode conflict (multi-zone)", the same definition used across the Gree platform it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.
Where Comfortmaker shows this code
DLC4 / DLF4 series, 2013 to 2015 (Gree-built): The code shows on the indoor unit's display in place of the temperature. If the display is off, press the Light button on the remote. Some models also count out the code as indicator blinks. E codes are system protections and faults, F codes are mostly sensor faults, H codes are outdoor and compressor protections, U codes are motor and valve faults, and P codes are power-supply faults.
Other Comfortmaker codes
Same part of the system as E7:
E7 on other brands
The same characters do not always mean the same thing. Check the brand on your unit.
- Blueridge E7 Mode conflict (multi-zone)
- Zone Air E7 Outdoor ambient temperature sensor fault (open or short circuit)
- Daikin E7 Outdoor fan motor fault (locked or abnormal)
- Mitsubishi Electric E7 Communication error between indoor and outdoor units
- Trane E7 Outdoor ambient temperature sensor fault (open or short circuit) / Communication error between indoor and outdoor units
Questions people ask
Can I reset a Comfortmaker E7 code myself?
Yes. Turn the system off at the breaker for five minutes, then restart it. If E7 comes back, the fault is real and needs the checks above.
Is it safe to keep running a Comfortmaker showing E7?
Not repeatedly. A protection code means the unit stopped itself to prevent damage, and resetting it over and over can turn a cheap repair into a compressor failure. Reset once, check the basics, and stop if it returns.
Do I need a technician for Comfortmaker E7?
You can almost always clear this yourself with the steps below. Not a fault.
Sources
- ICP DLCSRA Outdoor Unit Single Zone Ductless Service Manual 32808000801 (error code table)
- ICP ductless installation instructions IM-KSAIC04-04 (DLCPRA / DLCSRB / DLCERB / DLCLRA error codes)
- ICP R-410A Ductless Split System Service Manual 421 01 9204 00 (DLC4 / DLF4, 2013)
Updated September 2026. Codes and definitions vary by model year. If your manual disagrees with this page, your manual wins. Send a correction.