Tosot mini split error code F8
Over-current frequency limiting (protection).
- TypeProtection
- SystemPower supply
- Can I fix it?Usually a homeowner fix
What F8 means on a Tosot
The compressor is being slowed because current is near its limit. The unit keeps running at reduced output.
On this platform, F8 is a protection: the system stopped or throttled itself to prevent damage; many clear on their own once conditions return to normal.
Common causes
- A dirty outdoor coil.
- Low supply voltage.
- Extreme outdoor temperatures.
How to fix it yourself
You can almost always clear this yourself with the steps below.
- Look at the outdoor unit: clear leaves, cottonwood fluff, snow or ice from the coil and make sure the fan can spin freely and nothing is stacked against the cabinet.
- If you own a multimeter and are comfortable using it, measure the supply voltage at the outdoor unit's L1 and L2 terminals with the unit running. A 230 V system should read roughly 208 to 253 VAC.
Switch off power at the breaker before opening either unit. Capacitors in the outdoor unit hold a charge for several minutes after power is cut.
When to call a technician
No technician unless it persists with a clean coil and normal voltage.
Which Tosot units show F8
This page applies to Tosot Tosot single-zone and Tosot multi-zone units. Tosot's own documentation lists F8 as "Over-current frequency limiting (protection)", the same definition used across the Gree platform it is built on. If your unit shows a code with a different shape (for example a four-character code, or a plain number), it is from a different table; use the lookup with your exact code.
Where Tosot shows this code
The code shows on the indoor unit's display in place of the temperature. If the display is off, press the Light button on the remote. Some models also count out the code as indicator blinks. E codes are system protections and faults, F codes are mostly sensor faults, H codes are outdoor and compressor protections, U codes are motor and valve faults, and P codes are power-supply faults.
Other Tosot codes
Same part of the system as F8:
F8 on other brands
The same characters do not always mean the same thing. Check the brand on your unit.
- Blueridge F8 Over-current frequency limiting (protection)
- Zone Air F8 Four-way (reversing) valve abnormality protection
Questions people ask
Can I reset a Tosot F8 code myself?
Yes. Turn the system off at the breaker for five minutes, then restart it. If F8 comes back, the fault is real and needs the checks above.
Is it safe to keep running a Tosot showing F8?
Not repeatedly. A protection code means the unit stopped itself to prevent damage, and resetting it over and over can turn a cheap repair into a compressor failure. Reset once, check the basics, and stop if it returns.
Do I need a technician for Tosot F8?
You can almost always clear this yourself with the steps below. No technician unless it persists with a clean coil and normal voltage.
Sources
- Tosot owner's manual (error code table)
- Gree residential split service manuals
Updated September 2026. Codes and definitions vary by model year. If your manual disagrees with this page, your manual wins. Send a correction.